Dade City FL 33523
Our Complete craft metal catalog:

COPPER SHEET

BRASS SHEET

  ALUMINUM SHEET
 THIN SHEET METAL
 CRAFT WIRE:

 SALE & SAMPLE SETS

 TOOLS & SUPPLIES

 Recycled & Vintage Metal
"HOW TO SOLDER IN BRASS & COPPER"
Downloadable & Printable Booklet
Easily Solder wire & sheet metal copper, brass , bronze & Nickel
by the Whimsie Studio Craftsmen
 

AVAILABLE TO ORDER NOW... scroll down this page
 
Fine metal craft for 25+ years
Brief Metal Craft information
 
Order securely through our cart
Information & contact
"HOW TO SOLDER"
Copper, Bronze, Brass & Nickel"
 
 
This booklet makes soldering easy for everyone!
 
Our instructional 19 page color booklet on the basics & more of how to solder copper, brass, & bronze.
 
 
Quickly learn how to solder wire or sheet metal:
 
It takes you from tools & supplies needed, charts of metals, cleaning, flux, safety, to soldering with a demonstration exercise that you can do.
 
 
 
A unique,practical and inexpensive approach using the least amount of readily available equipment and supplies . It includes quick jigging.
 
A large format 8 1/2 x 11 inch- 19 Pages with plenty of color photos for every step, with several practice exercises.
 
This is our most requested craft information. Written from over 25 years of experience by Larry Henke & Ron Bodoh
 
CLICK HERE TO GO TO ORDER PAGE
 
After ordering you will be directed to a page
to download in pdf format & print a copy for yourself.
Please wait for page for download page to appear after payment.
 
 
THIS MUST BE ORDERED SEPARATELY FROM ANY OTHER ITEM
TO BE DOWNLOADABLE AFTER PAYMENT
 
 
This booklet is unavailable in pre-printed form

 
Soldering- a introduction
 
What is soldering?...
Soldering; very simply put is 'gluing' two pieces of metal together by applying heat and melting a third metal or alloy into the joint. This third metal or 'solder' must melt at a lower temperature than the metal being soldered and be able to adhere to the surfaces being joined.
Not all metals can be soldered easily. Copper, Brass, Bronze, Nickel and Tin are all metals that can be soldered at soldering iron and propane torch temperatures (400-800f) and use solders and fluxes that are readily available. Aluminum and stainless steel do not solder easily.
 
Solder is an alloy or mixture of metals that melts at a lower temperature than the metal being soldered.
Flux is an acidic or caustic powder, paste or solder core that cleans the joint and lubricates the flow of the solder when the heat is applied.
 
A bit of caution here- The fumes produced when soldering are toxic and flux is caustic. Adequate ventilation as well as eye and skin protection are required. Care must be taken to protect your surrounds from the heat, splatter and open flame involved with soldering.
Heat is required to cause the flux and solder to melt and flow into the joint. Heat can be applied using a soldering iron or torch.
 
Soldering irons and come in a wide range of wattage.
A propane plumbing torch is a good source of heat for most craft and art soldering projects.

Copper crab made by the authors

 
The first step in any successful solder joint is to clean the surfaces to be soldered.
Next, apply the flux along the joint using a brush or scrap of wire.
Practice and experimentation will yield increasingly better results. If you have trouble, remember the basics: the joint must be clean, flux aids the flow of the solder into the joint and adequate heat must be used for the thickness of the solder and size of project.
 
 
For a very comprehensive explanation of soldering-
Order our booklet on SOLDERING:
A complete guide with tutorials,
19 pages with color photos to Download & Print:
more about this booklet
 
 
 
HAND SOLDERED COPPER & BRASS CREATIONS
MADE BY THE AUTHORS
 
(c) Copyright 2009 the Whimsie Studio. Larry Henke & Ronald Bodoh

The entire contents of this site and photographs shown herein are original and copyright protected.
(c) Copyright 2010 all rights reserved -the Whimsie Studio
 
These articles and writings are for our customers personal use only. They may not be copied or published in whole or part, in any form electronically or in print without express written permission of the authors Larry Henke & Ronald Bodoh

 

 
 
 
 
 

 

This site is copyright protected for content, design, and photographs.
(c) Copyright 2006 -the Whimsie Studio. Larry Henke & Ronald Bodoh